MODELS DAT ANTI MOISTURE DEVICES DAT 50 - DAT 100 - DAT 150 TYPES

CHARACTERISTICS

One of the main causes for electrical troubles on electrical and electronic sets is due to the moisture which is formed on components during variation of the ambient temperature. A simple and economic way to avoid any trouble of this kind, consists on application of anti-condensation devices (Heaters) which maintain the temperature inside the enclosure some degrees higher than the ambient temperature in order to prevent moisture condensation.

The Heater DAT 50, DAT 100 and DAT 150 have been developed for this specific use.

Their main features are as follows:

Surface temperature limited to 70°C allows assembling without problems.
A thermoswitch permits maximum power at very low temperatures, then reduces the power dissipated till turn off the devices at +55°C.
The DAT models are provided with simple clip mounting for 35 mm DIN rail.
Use of power wirewound resistors, under MIL-R-18546 E specs., increase reliability and suitable supply voltage.

ELECTRICAL CHARACTERISTICS

Max Power Ratings	DAT 50 = 50 W DAT 100 = 100 W DAT 150 = 150 W
Voltage Supplied	Standard 220 Vac ±20% On request any voltage any voltage supplied from 24 to 220 Vac.
Dielectric Strength	2,000 Vac for any type
Insulation Resistance	1,000 MOhm minimum at 500 Vdc

P = A x Δ T x K

A = Console external surface (m2)

Δ T = temperature difference (°C)

K = 3.5 W/m for plastic console

K = 5.5 W/m for iron plate (closed room)